DewEze A Clutch Pump Kit 1990-1994 Chevy 3500 12GPM Rear Port This is a Complete Clutch Pump Kit (Basic Pump Kits Include: Pump, Idler Pulley, Clutch Serpentine Belt, Crankshaft Pulley, Pump Mtg. Bracket) NOTE TO INSTALLER Clutches will need a short burnishing period to generate the rated torque. This is a process of cycling the clutch to slightly wear the friction surfaces. This allows full contact and maximum magnetic attraction required for rated torque (or more). BURNISHING-TO AVOID BURNING OR HEAT DISTORTION, THE FOLLOWING PROCEDURE IS RECOMMENDED: After clutch is installed, run at 1000-1200 RPM. Cycle the clutch on/off at the rate of 10 seconds on – 10 seconds off for a minimum of 50-100 cycles. Proposition 65 WarningImage may not represent actual system, please look at brochure for more accurate detailsSuction F: 20mbPressure F: 16mbSeries: P315Model Number: 326-9110-215Cubic Inch Displacement: 1.4″Center Section Thicken: 1-1/2″. (Basic Pump Kits Include: Pump, Idler Pulley, Clutch Serpentine Belt, Crankshaft Pulley, Pump Mtg. Bracket) NOTE TO INSTALLER Clutches will need a short burnishing period to generate the rated torque. This is a process of cycling the clutch to slightly wear the friction surfaces. This allows full contact and maximum magnetic attraction required for rated torque (or more). BURNISHING-TO AVOID BURNING OR HEAT DISTORTION, THE FOLLOWING PROCEDURE IS RECOMMENDED: After clutch is installed, run at 1000-1200 RPM. Cycle the clutch on/off at the rate of 10 seconds on – 10 seconds off for a minimum of 50-100 cycles. Proposition 65 WarningImage may not represent actual system, please look at brochure for more accurate details
